...
You will need one location per building, and one application for MazeMap positioning.
It is important that when setting up the floors that the floor number in IndoorAtlas is the same as the z-level for the floor in MazeMap. This is set by clicking on My location in the main menu and choosing the building. For each floor click on the three dots to get a menu as shown bellow.
In this menu click on Edit floor plan info and image. You then get to the screen bellow:
The Floor number must be the same as the z-level in MazeMap. If you are not sure of the z-levels used in MazeMap, you can go to your campus in use.mazemap.com, click on the building and look at the url. The url will look similar to this:
In the url you will find the zlevel as marked above. If you need any help do contact the customer success team at support@mazemap.com.
Step 3: Fingerprint onsite
...
If you are using IndoorAtlas in combination with Cisco CMX you need to set up a LIPI Server. This is explained in the tutorial /wiki/spaces/DPD/pages/7864425.
Step 7: Testing in MazeMap app
We would like to refer you to the debug mode in the MazeMap app. This mode will be very helpful while testing.