...
In this menu click on Edit floor plan info and image. You then get to the screen bellow:
The Floor number must be the same as the z-level in MazeMap. If you are not sure of the z-levels used in MazeMap, you can go to There are two ways to check your floor's z level in MazeMap.
First, is to go your campus in use.mazemap.com, click on the building and look at the url. The url will look similar to this:
In the url you will find the zlevel as marked above.
Or second, you can go to the Buildings menu, choose your building from the list in the side bar and you will be directed to this view:
Where the upper number on the left side refers to the floor name showing in the map (eg. "K2") and the value below is the z level (eg. "-2").
Remember: MazeMap never assigns 0 as Z level value to any floors of the building. All floors on top of the ground are assigned positive (integer) numbers and all floors below the ground are assigned negative (integer) numbers, as shown in the screenshots above.
If you need any help do contact the customer success team
...
Step 3: Fingerprint onsite
IndoorAtlas has a process called Fingerprinting to gather signal data in the buildings. We recommend that you read through documentation of how to achieve good fingerprinting coverage and recording paths. We suggests that you use different devices to do the fingerprinting to achieve the best result, you are recommended to do the fingerprinting 2-3 times (or until the visualized path turns green) in order to record the best result. A list of the best devices for the fingerprinting is available here. It is recommended that you be in the middle of a corridor or room instead of being close to a wall when collecting fingerprints. Please also note the Android 9 Wifi Fingerprinting Limitations.
...
- The API key id and API key secret from the step above, for example:
API key id: 3d7259fa-0f5f-4af1-bf5d-56aeb8c1205f
API key secret: M1ejvibhNCzey2mq0pXNVMQRJS7SW0DVieqJHKlrs95jKdbbWXu3m2WOL9DJlK9m/DQiclez6P3D+EUAidGQy6lMMSRXp8U+HldgwUhokNCX7ogkaFKBhrOFCbzzCw==
Note: IndoorAtlas data are automatically sent to MazeMap upon registration of the API key ID and API key Secret in the Map Editor Tool.
Step 6: Set up LIPI Server
If Only in case you are using IndoorAtlas in combination with Cisco CMX, then you also need to set up a LIPI Server. This is explained in the tutorial /wiki/spaces/DPD/pages/7864425. tutorial HOW TO INSTALL THE NEW AND IMPROVED LIPI.
Step 7: Testing in MazeMap app
...