Page Comparison

...

For each map you want to use positioning on,  you have to add at least three GPS markers in your Cisco Prime Infrastructure.

HowtoHow-To: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/CMX/CMX_Prime.html#pgfId-1019714

...

To obtain coordinates for the GPS markers:

1. use Use the following web page: https://debug.mazemap.com/poi-inspector/
2. Select the floor you want to create GPS markers for and zoom in if necessary
3. Click in the map to find lonlat coordinates for a point. Use easily recognizable recognisable points such as corners.

Step 2: Export maps from Cisco Prime, Import in CMX & Restart CMX

(This has to be repeated every time you make changes to the maps (including GPS markers) in Cisco Prime.

HowTo: http://www.cisco.com/c/en/us/td/docs/wireless/mse/10-2/cmx_config/b_cg_cmx102/getting_started_with_cisco_cmx.html#concept_48D1D73677E9492D9D2BA51EE81AD2AE

...

Remember to restart the CMX after this

Step 3: Restart LIPI service

1. SSH into LIPI server

2. Run the following command as root: 

   Code Block
   syssudo systemctl restart geopos.service lipi

   
   

Step 4: Check that GPS markers are loaded into LIPI

Check the following web page:

https://<LIPI Address>/gcpdump

This will generate a report of all floors and their GPS markers.