...
-If you are installing LIPI for the first time, please refer to this document first HOW TO INSTALL THE NEW AND IMPROVED LIPI LIPI for CMX Installation Guide
If you are updating your current LIPI installation, please refer to How to update to the new and improved LIPI v 4.x
...
3. CMX provides a number of options for the type of notifications. But we will focus on the types Location Update and Movement
If you choose “Location Update”:
...
Note however that choosing a very low distance may result in too many location updates sent to the lipiLIPI.
4. It is optional to fill in the MAC address and HTTP Headers as it is inconsequential for our purpose, but you have to fill the Receiver fields, type in the Mazepos address (DNS) of your LIPI. Then type in 443 in the Port field and the word “location” on the field after the slash (/) symbol.
...
Expand the drop-down menu and go to “Advanced Configuration”
...
And then Please make sure to click the “Enable notifications” and “Use only notifications” “Enable notifications” and “Use only notifications” toggle switches to enable them . All the other fields are in default settings and you can change the values as may be appropriate in your setup.
...
If you still have LIPI version 3.x
5. Retrieve the LIPI JSon Config file and add two lines as shown below:
...
“useOnlyNotifications”:true,
“notificationEnabled”:true,
Note: When using notifications, it is adviced to use onlyNorification for performance reasons. and ensure stable performance.
The disadvantage of this however is that locations might take a while to be sent by the CMX as transmission of notification is dependent on the user/tester complying with the condition of the minimum distance and hence, devices may not receive location from the lipi immediately. 6. Restart the LIPI after the update is doneLIPI immediately.
All the other fields are in default settings and you can change the values as may be appropriate in your setup.
...
6. Run Update.