How To Add GPS markers to CMX

Step 1: Add GPS markers in Prime

For each map you want to use positioning on, you have to add least three GPS markers in your Cisco Prime Infrastructure.

How-To: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/CMX/CMX_Prime.html#pgfId-1019714

It is very important to use coordinates obtained using MazeMap for the GPS markers. Do not use coordinates obtained from other sources such as Google Maps, as these may have different building placements which will cause a loss of accuracy in the positioning service.

To obtain coordinates for the GPS markers:

Use the following web page: https://debug.mazemap.com/poi-inspector/
Select the floor you want to create GPS markers for and zoom in if necessary
Click in the map to find lonlat coordinates for a point. Use easily recognisable points such as corners.

Step 2: Export maps from Cisco Prime, Import in CMX

This has to be repeated every time you make changes to the maps (including GPS markers) in Cisco Prime.

HowTo: http://www.cisco.com/c/en/us/td/docs/wireless/mse/10-2/cmx_config/b_cg_cmx102/getting_started_with_cisco_cmx.html#concept_48D1D73677E9492D9D2BA51EE81AD2AE

Step 3: Restart LIPI service

SSH into LIPI server
Run the following command as root:
```
syssudo systemctl restart lipi
```

Step 4: Check that GPS markers are loaded into LIPI

Check the following web page:

https://<LIPI Address>/gcpdump

This will generate a report of all floors and their GPS markers.